x

Heat DETECTOR

Product Overview

Product              –            Series Base Mounted UV Flame Detector

Product Information 

VIRA – 104  Base Mounted Ultraviolet (UV) Flame Detector is designed to protect areas where flaming fires may be expected.

 

The detector is sensitive to UV radiation emitted by flames during combustion. Since it requires only UV radiation the flame detector responds even to stationary flames with no flicker like cigarette lighters and blue gas flames.

 

The detector is set to respond to UV radiation (185 to 260 nm) emitted by almost all flames including those invisible to the naked eye, e.g. hydrogen fires.

 

The detector has a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation and is designed for use in internal, fully enclosed areas.

Supply voltage                                                                                       17 - 28 V dc

Quiescent current                                                                                 550  µA

Alarm voltage                                                                                        6 to 33 V dc

Alarm current                                                                                         61 mA at 28 V  / 54 mA at 24 V  / 20 mA at 10 V

Terminal functions                                                                                L1 In and Out Supply positive / L2 Supply negative / –R Remote indicator negative connection

Remote output characteristics                                                          Remote is a current sink to the negative line limited to 17 mA

Alarm indicator                                                                                      Red light emitting diode

Holding voltage                                                                                      6 V min

Holding current                                                                                       10 mA min

Minimum voltage required to illuminate indicators                       12 V

Alarm reset voltage                                                                               < 1 V

Alarm reset time                                                                                     1 second

Range of view                                                                                          0.1 m² n-heptane at 25 m

Sensitivity                                                                                                 Class 1, EN 54-10

Field of view                                                                                             90º cone

Spectral response                                                                                  UV 180 to 260 nm

Operating temperature (no condensing or icing)                         -40ºC to +55ºC

Storage temperature                                                                            -40ºC to +85ºC

Relative humidity                                                                                  95% non-condensing

IP rating                                                                                                   1P54

Dimensions                                                                                            100 mm x 40 mm detector only  / 100 mm x 48 mm detector and base

Weight                                                                                                     150 g - detector only / 210 g - detector and base

Materials:                                                                                               Housing: White polycarbonate, V-0 rated to UL94 /   Terminals:  Nickel plated stainless steel

Are You Looking For A Best And Quality Service? Just Join
With Industial Press.

MORE DETECTORS

HEAT DETECTOR

Heat detectors use thermistors to give a voltage based on air temperature.

MULTI DETECTORS

VIRA-103 is a general-use detector, highly sensitive to fast, flaming, fire.

UV FLAME SENSOR

Petroleum Engineers are concerned with the petrol exploration, discovery.

UV IR FLAME DETECTORS

Materials Engineering should scientific & and engineering microstructure.

CO SENSOR

Ensuring high reliability and optimal sed performance of rotating power.

BEAM DETECTOR

Creating a dynamic company for that is continuous exploration & develop.

Testimonials

WHAT CUSTOMERS SAID

    Get In Touch

    Send Message Us

    Founded in 2006, Electrogroups India is a trusted manufacturer and distributor of advanced fire safety systems, including fire alarms, suppression systems, gas detection, fire fighting equipment, fire-rated doors, and P.A. systems. Backed by a dedicated R&D team and a 50,000 sq.ft. manufacturing facility in Baghpat, Uttar Pradesh, we proudly deliver innovative, reliable, and Make in India fire safety solutions to protect lives and property.

    INSTAGRAM

    GET IN TOUCH

    ADDRESS:

    WZ-555, Naraina Village,

     New Delhi – 110028

    CALL US:

    +(91) 9899983223

    Info@electrogroupsindia.com

    MON - SAT DAY:

    9.00AM- 6.30 PM

    Sunday Closed